Carbide Burr The Fine Tooth Cutter Is Suitable For Finishing

Carbide Burr is a cutter made of carbide. (WC, TiC) micron-grade powder as the main component of the cobalt (Co) or nickel (Ni), the carbide is a high hardness refractory metal carbide (WC, TiC) , Molybdenum (Mo) as a binder, in a vacuum furnace or hydrogen reduction furnace sintered powder metallurgy products.

Classification of quality alloy milling cutters

Carbide Burr Main points: Solid Carbide Burr | Carbide straight handle slot cutter | Carbide saw blade cutter | Carbide helical drill cutter | Carbide Burr reamer cutter | Carbide End Mills | Carbide Ball End Mills

Carbide Milling Cutter Uses:

Carbide Burr is generally used for CNC machining centers, cnc engraving machine. Can also be installed on the ordinary milling machine processing some of the more difficult and not complex heat treatment materials.

1 Cemented Carbide Cylindrical Mills: For flat milling machines. Knife teeth distributed in the circumference of the cutter, according to the tooth is divided into straight and spiral teeth two. According to the number of teeth and coarse teeth two teeth. Spiral teeth coarse teeth milling teeth less teeth, high strength teeth, chip space, suitable for rough processing; fine tooth cutter for finishing.

2 Carbide Burrr: for vertical milling machine, face milling machine or gantry milling machine on the plane, the end and circumference are knife teeth, but also coarse and fine teeth of the points. Its structure has a monolithic, insert type and indexable type.

3 Carbide end mills: for processing trenches and stepped surfaces, etc., the teeth in the circumference and end face, the work can not be fed along the axial. When the end mill through the center of the end teeth, the axial feed.

4 Carbide three-edge cutter: for processing a variety of trench and step surface, its both sides and circumference are knife teeth.

5 Carbide Burr: for milling into a certain angle of the groove, there are two kinds of single angle and double angle milling cutter.

6 Carbide saw blade cutter: for processing deep groove and cut the workpiece, the circle has more teeth. In order to reduce the friction at the time of milling, the teeth on both sides of the 15 '~ 1 ° sub-deflection. In addition, there are keyway cutter, dovetail slot cutter, T-slot cutter and a variety of milling cutter and so on.

Carbide milling cutter milling method

Carbide Burr relative to the workpiece feed direction and the direction of rotation of the milling cutter are the following two milling methods:

The first is smooth milling

The direction of rotation of the milling cutter and the direction of the cutting are the same, and the cutter cuts the workpiece and cuts the final chip at the beginning of cutting.

The second is reverse milling

The direction of rotation of the milling cutter and the direction of the cutting of the cutting are reversed, and the milling cutter must slip on the workpiece before starting cutting to start with a cutting thickness of zero and to maximize the cutting thickness at the end of the cutting.